I’ve written a post on adjusting the bootup resolution i.e. the resolution of the splash screen that shows up when you start Ubuntu. Lots of things have changed since then. GRUB2 has replaced GRUB as the default bootloader and Plymouth has replaced Usplash so although changing the bootup resolution has a similar procedure, its a bit more complicated with GRUB2 and Plymouth.
Why would you want to change the bootup resolution? People are complaining that the ubuntu logo in the startup splash screen has turned large and ugly after installing ATI or Nvidia propitiatory divers. That is because the bootup resolution is too low. Other people might not be able to see the splash screen at all. In short, if you have any issue related to the splash screen not showing up properly, you are recommended to try this procedure. This is what the splash screen would normally look like(click to view full size)-
Note- In this procedure, I’ve assumed that your monitor supports a resolution of 1280×1024 and used this resolution in the steps. If you have an old monitor, it is possible that it might support a maximum resolution of 1024×768. You are free to try any resolution your monitor supports. If its a widescreen, you might want to try widescreen resolutions as well. Any resolution would work as long as your monitor supports it. And for those who think its not obvious, when I write ‘run
Here’s how to change the bootup resolution and fix the big, low-res Plymouth logo-
1. First of all, run
sudo apt-get install v86d in a terminal to install the v86d package.
2. Now you need to edit the resolutions in the GRUB2 files so run
sudo gedit /etc/default/grub and look for the line-
and replace it with-
GRUB_CMDLINE_LINUX_DEFAULT=”quiet splash nomodeset video=uvesafb:mode_option=1280×1024-24,mtrr=3,scroll=ywrap”
Then look for-
and replace it with-
Note that you need to remove the # from the beginning of the GRUB_GFXMODE line else it will be commented out. Also, I repeat, you may use any resolution you wish to use in place of 1280×1024 as long as your monitor supports it. Save the file and close the text editor.
3. Now you need to edit another file, so run
sudo gedit /etc/initramfs-tools/modules and add the following line at the end of the file-
uvesafb mode_option=1280×1024-24 mtrr=3 scroll=ywrap
Don’t forget you need to replace 1280×1024 if you used some other resolution in the last step. Save the file and close the text editor.
4. Now run
echo FRAMEBUFFER=y | sudo tee /etc/initramfs-tools/conf.d/splash
You’ll get FRAMEBUFFER=y as output.
5. Now run
This will generate the updated grub.cfg file.
6. The last step is generating the new splash screen. To do that, just run
sudo update-initramfs -u
Now reboot Ubuntu and you should see a much better looking, high resolution splash screen and GRUB menu. If you see nothing at all, it might be because your monitor does not support the resolution you set. Try a lower resolution in that case.